TS26-10 Laboratorium Uji Tanah
Kata Kunci:
Laboratorium Uji TanahSinopsis
Buku ajar Laboratorium Uji Tanah ini hadir sebagai panduan komprehensif bagi mahasiswa teknik sipil, akademisi, dan praktisi dalam memahami karakteristik material bumi. Disusun berdasarkan Kerangka Kualifikasi Nasional Indonesia (KKNI) Jenjang 5 dan pendekatan Outcome-Based Education (OBE), buku ini menjembatani kesenjangan antara teori mekanika tanah dan aplikasi rekayasa geoteknik di dunia nyata.
Pembahasan di dalam buku ini dirancang secara sistematis, mencakup empat pilar utama penyelidikan tanah. Pilar pertama mengupas pengujian lapangan seperti uji sondir, hand bor, Dynamic Cone Penetrometer (DCP), dan kerucut pasir. Pilar kedua mendalami pengujian sifat fisik tanah, meliputi kadar air, berat isi, analisis ukuran butir, hingga batas Atterberg. Pilar ketiga berfokus pada pengujian sifat mekanik yang krusial untuk desain struktur, seperti uji pemadatan, CBR, geser langsung, kuat tekan bebas, konsolidasi, dan permeabilitas.
Sebagai penutup, pilar keempat membekali pembaca dengan keterampilan analitis tingkat tinggi dalam mengolah data mentah, menyajikan grafik visual, menyusun laporan teknis, hingga merumuskan rekomendasi perbaikan tanah dan desain pondasi. Buku ini tidak hanya menyajikan langkah-langkah praktikum secara mekanis, tetapi juga menanamkan filosofi rekayasa di balik setiap angka yang dihasilkan. Melalui penjelasan prosedur yang detail, penyertaan rumus matematis eksplisit, dan studi kasus aplikatif, buku ini menjadi referensi esensial untuk mencetak ahli geoteknik yang kompeten, teliti, dan profesional.
Unduhan
Referensi
American Association of State Highway Transportation Officials (AASHTO). (1982). Standard Specifications for Transportation Materials and Methods of Sampling and Testing. Washington DC: AASHTO, Doi: -
American Society for Testing and Materials (ASTM). (2020). ASTM D6951/D6951M: Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications. West Conshohocken: ASTM International, Doi: 10.1520/D6951_D6951M-18
American Society for Testing and Materials (ASTM). (2022). ASTM D1556/D1556M: Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method. West Conshohocken: ASTM International, Doi: 10.1520/D1556_D1556M-15R22
ASTM International. (2020). Standard test methods for laboratory compaction characteristics of soil using standard effort (12,400 ft-lbf/ft³ (600 kN-m/m³)) (ASTM D698-12e2). West Conshohocken: ASTM International, Doi: 10.1520/D0698-12R21
Badan Standardisasi Nasional (BSN). (2008). SNI 2827:2008 Cara Uji Penetrasi Lapangan dengan Alat Sondir. Jakarta: Badan Standardisasi Nasional, Doi: -
Badan Standardisasi Nasional (BSN). (2017). SNI 2827:2017 tentang metode uji sondir (CPT). Jakarta: Badan Standardisasi Nasional, Doi: -
Badan Standardisasi Nasional (BSN). (2017). SNI 8460:2017 Persyaratan Perancangan Geoteknik. Jakarta: Badan Standardisasi Nasional, Doi: -
Badan Standardisasi Nasional (BSN). (2018). SNI 1726:2018 tentang tata cara perencanaan ketahanan gempa untuk struktur bangunan gedung dan non gedung. Jakarta: Badan Standardisasi Nasional, Doi: -
Bai, R., Shen, F., & Zhang, Z. (2023). An integrated machine-learning model for soil category classification based on CPT. Multiscale and Multidisciplinary Modeling Experiments and Design, 7(3), 2121–2146, https://doi.org/10.1007/s41939-023-00324-z
Bowles, J. E. (1992). Engineering properties of soils and their measurement (4th ed.). New York: McGraw-Hill, Doi: -
Da, H., Jayhyan, K., Adam, K., & Garima, B. (2025). Geotechnical Engineering Lab Manual. Kennesaw: Kennesaw State University, https://digitalcommons.kennesaw.edu/oertextbooks/30
Das, B. M. (2019). Principles of geotechnical engineering (9th ed.). Boston: Cengage Learning, Doi: -
Hardiyatmo, H. C. (2018). Mekanika tanah 1 (Edisi ke-7). Yogyakarta: Gadjah Mada University Press, Doi: -
Hardiyatmo, H. C. (2020). Mekanika Tanah I. Yogyakarta: Gadjah Mada University Press, Doi: -
Jwaida, Z., Dulaimi, A., Jafer, H. M., Mydin, M. A. O., Al-Khafaji, R., & Bernardo, L. F. A. (2024). Improving Soft Subgrade Stability Using a Novel Sustainable Activated Binder Derived from By-Products. Geotechnical and Geological Engineering, 42(6), 5065–5084, https://doi.org/10.1007/s10706-024-02830-4
Kamal, A. S. M. M., Hossain, F., Rahman, M. Z., Ahmed, B., & Sammonds, P. (2022). Geological and soil engineering properties of shallow landslides occurring in the Kutupalong Rohingya Camp in Cox’s Bazar, Bangladesh. Landslides, 19(2), 465–478, https://doi.org/10.1007/s10346-021-01810-6
Kaya, A. K., Yavuz, E. H., Ekici, İ., Balaban, E., & Onur, M. İ. (2023). Comparison of gyratory compaction effect on coarse and fine-grained soils. Journal of Engineering Research, 13(1), 423–431, https://doi.org/10.1016/j.jer.2023.07.017
Kennedy, C. (2024). Estimation of dynamic soil properties for geotechnical analysis in the Niger Delta using index testing and empirical correlations. Discover Geoscience, 2(1), 1-15, https://doi.org/10.1007/s44288-024-00092-4
Lutenegger, A. J. (2021). In Situ Testing Methods in Geotechnical Engineering. Boca Raton: CRC Press, https://doi.org/10.1201/9781003002017
Lutenegger, A. J. (2022). Laboratory Manual for Geotechnical Characterization of Fine-Grained Soils. Boca Raton: CRC Press, https://doi.org/10.1201/9781003263289
Mahardika, A. G., Mulya, E. S., Biantoro, A. W., Setiawan, D., Ariostar, Nuryono, B., & Ramady, D. G. (2021). Analysis of Soil Compaction using Proctor Standards in Highway Construction Design. Journal of Physics Conference Series, 1933(1), 12084–12084, https://doi.org/10.1088/1742-6596/1933/1/012084
Mir, B. A. (2021). Manual of Geotechnical Laboratory Soil Testing. Boca Raton: CRC Press, https://doi.org/10.1201/9781003200260
Moorberg, C. J., & Crouse, D. A. (2021). Soils Laboratory Manual: K-State Edition, Version 2.0. Manhattan: New Prairie Press, https://newprairiepress.org/ebooks/39
Niazi, F. S. (2022). CPT-Based Geotechnical Design Manual, Volume 1: CPT Interpretation, Estimation of Soil Properties. West Lafayette: Purdue University, https://doi.org/10.5703/1288284317346
Okonkwo, U. N., & Kennedy, C. (2023). The Effectiveness of Cement and Lime as Stabilizers for Subgrade Soils with High Plasticity and Swelling Potential. Saudi Journal of Civil Engineering, 7(3), 40–60, https://doi.org/10.36348/sjce.2023.v07i03.001
Owolabi, O., Adeyemi, G. O., Sasanya, B. F., & Akosile, S. (2026). Experimental and ensemble machine learning determination of lateritic soils’ soaked CBR. Discover Civil Engineering, 3(1), 1-15, https://doi.org/10.1007/s44290-026-00484-0
Raheena, M., & Robinson, R. G. (2023). One-Dimensional Consolidation Test with Pore Pressure Measurements , An Accelerated Procedure. Geotechnical Testing Journal, 46(2), 335–350, https://doi.org/10.1520/gtj20220098
Ramzan, S., Lone, B. A., Nabi, A., & Akhter, S. (2025). A Handbook on Chemical Analysis of Soil. New Delhi: AkiNik Publications, https://doi.org/10.70593/978-93-7185-225-8
Reading, P., & Martin, M. (2025). Geotechnical laboratory testing. London: Emerald Publishing, https://doi.org/10.1108/978-1-83549-890-320251006
Sakleshpur, V. A., Prezzi, M., Salgado, R., & Zaheer, M. (2022). CPT-Based Geotechnical Design Manual, Volume 3: CPT-Based Design of Foundations, Example Problems. West Lafayette: Purdue University, https://doi.org/10.5703/1288284317348
Singh, G., Silori, R., & Kumar, M. (2022). LABORATORY MANUAL FOR GEOTECHNICAL ENGINEERING. Geneva: CERN European Organization for Nuclear Research, https://doi.org/10.5281/zenodo.6612678
Singh, N. J. (2023). Soil, Water and Plant Analysis. London: Book Publisher International, https://doi.org/10.9734/bpi/mono/978-81-19315-80-2
Solangi, K. A., Abbasi, B., Solangi, F., Khaskhali, S., Siyal, A. A., Mehmood, H., Akram, M., Iqbal, R., Al-Ghamdi, A., Elshikh, M. S., Abesh, B., Faruque, J., Hubbart, El-Fattah, A., Hashem, D., F, Sh, A.-E., Ahsan, A., Talukder, A., & Shi, L. (2024). Assessment of Saturated Hydraulic Conductivity with Using Soil Particle Size Distribution: A Comparative Study of Constant Head and Falling Head Methods. Global NEST Journal, 26(1), 1–9, https://doi.org/10.30955/gnj.005833
